You’re a blogger and are constantly hearing about pinging. The thing is, you don't know what it is and what it can do for your blog. Well that's fine because a lot of bloggers don't quite understand pinging. In this newsletter, we will explain what pinging is, how it helps your blog, and what the best pinging services are. After you've read this newsletter, you'll know exactly how to use pinging to make your blog popular.
What is pinging?
When a blog is pinged, it essentially tells a web blog tracking system that the blog has been updated. Thus, pinging is the process of telling tracking services that a site has been updated.
So how does pinging work? Well, a ping service scans regularly blogs for updates. Whenever there is a new update for a particular blog, that is reported back to the pinging service’s site. You can almost think of ping services being just like search engine spiders—both scan sites looking for information, and both report that information back to their specific site. The difference is, a ping service only reports back new blog posts.
Why is pinging useful for my blog?
Pinging, in effect, tells people that there is a new blog posting available. Those who are loyal followers of your blog will see the ping and want to visit your blog. Those who haven’t read your blog before will see the ping and perhaps think “hey, there’s a new blog I haven’t been to before, I think I’ll check it out”. Pinging helps to increase your traffic because it tells people when your blog is updated. Those who visit sites with pinging services will see this information in the form of a scroll on the left or right side, or top of the page. The scroll is usually in XML format and typically includes the title and URL of your blog, as well as the date and time of the update.
OK, so now I know what pinging is. Who offers pinging?
The answer is, there are several pinging services available which you can use to have your blog pinged. We’ll go over some of them right now.
Weblogs.com
Weblogs.com is probably the most well-known pinging service. Weblogs.com monitors sites for updates and then pings whenever there is an update to report. Virtually every blog software is available to use Weblogs.
Yahoo’s Blo.gs
Another popular pinging service. This one is offered by Yahoo and has a built-in integration with movable type and other tools. One cool thing about this service is that it offers the ability to give out updates via Instant Messenging services like AOL and ICQ. It is a direct pinging service, so those who sign up for subscriptions to your blog will be sent an email anytime your blog is updated.
Blogrolling.com
Blogrolling allows its bloggers to manage their blogrolls (updates) through a web-based interface. Recently updated blogs are also highlighted on Blogrolling’s web site. Data is automatically retrieved from other sites like blogger.com and weblogs.com every 5 minutes. Often times your blog is already being pinged by Blogrolling, so you might not have to sign up for it. Search on the site first for your URL before signing it up.
Technorati
Available at http://rpc.technorati.com/rpc/ping, Technorati is another service that pings blogs. It gets its data from a variety of places and is definitely a site you should go to for blog pinging.
These are just 4 of the many different blog pinging services available. A quick search on Yahoo or Google will reveal many other possible blog pinging services to use for your blog. It is best to sign up for as many as you possibly can to ensure that your blog is well-pinged. A well-pinged blog will definitely help your blog attract more visitors. So sign up for as many as possible and watch your blog traffic increase.
Pinging tells people when your blog is updated. It is an incredibly useful, and easy to sign up for service, so be sure to sign your blog up for pinging!
Sunday, September 28, 2008
How to clean your Mother Board
If you have not done the inspection mentioned in the previous article - How to Clean your Case, now is the time to do so. Look at the blades of the fan in the back of the computer. Also look at any vents. Is there clusters of dust there? Is there grime caked on to it? If so, the inside needs to be cleaned. If the fan blades are clean but it has been several years since you have cleaned the motherboard or if the computer is around cigarette smoke, it probably should be cleaned anyway. Dust and particles in the air (like cigarette smoke) can build up on the circuitry of the motherboard and cause it to heat up and/or corrode.
The first thing that you need to do is unplug your computer. Then open up the case to get access to the motherboard. Cases open differently. If you don't know how to open your case, look on the back of your computer along the edge for some screws. These screws may hold on side panels or an upside down U shaped panel that covers the sides and top. Removing the screws will allow you to take off the cover. Other cases have the screws on the front of the computer. To get access to these screws, you must first remove the front panel by pressing a hidden latch. The cover is there to give easy access to the inside of your computer, so if you look hard enough, you should be able to figure out how to remove it.
Remember that if you touch anything on the motherboard, you should be grounded by either touching the metal frame of the computer with your other hand or by wearing a special grounding device.
The goal of cleaning the motherboard is to remove all dust and debris from the motherboard and all components inside of the case. This can be done using one of three methods.
The preferred method is to use a can of compressed air to blow it out. Always hold the can in an up-right position to prevent the propellent chemicals which can damage or corrode components from coming out. Dust and dirt should be blown away from the motherboard and out of the case.
Another way to remove dust is to use a vacuum. The common advice is to only use a battery operated vacuum because an AC powered vacuum causes static and static can ruin the motherboard. I have used an AC powered vacuum (before I knew that it was not recommended) to clean my motherboard many times and it has never caused any problems, but I may have just been lucky. When using the vacuum, keep the nozzle a couple of inches away from the motherboard or any other components so that it does not come in contact with them and so that any small parts are not sucked into the vacuum.
If you do not have a can of compressed air or a vacuum, you can use a dry cloth and brush to clean the motherboard. Be careful not to dislodge or break anything using this method.
While cleaning the motherboard, be careful not to unplug any cables or connections or to dislodge any loose components, such as, jumpers.
Methodically clean the whole inside of the case going over all of the motherboard from one end to the other and all other components. Don't forget to clean the fans and heat sinks. Do not open up the power supply box or stick anything in it beyond the fan. If you do, you could get a shocking surprise and ruin your computer.
If your computer does not work when you put it back together, something was obviously dislodged during the cleaning. Open the case back up and push all connections and cards into their slots. Look for anything that may have become disconnected.
Cleaning the motherboard is probably the most dangerous form of cleaning but it is necessary to prevent an early death of your computer.
The first thing that you need to do is unplug your computer. Then open up the case to get access to the motherboard. Cases open differently. If you don't know how to open your case, look on the back of your computer along the edge for some screws. These screws may hold on side panels or an upside down U shaped panel that covers the sides and top. Removing the screws will allow you to take off the cover. Other cases have the screws on the front of the computer. To get access to these screws, you must first remove the front panel by pressing a hidden latch. The cover is there to give easy access to the inside of your computer, so if you look hard enough, you should be able to figure out how to remove it.
Remember that if you touch anything on the motherboard, you should be grounded by either touching the metal frame of the computer with your other hand or by wearing a special grounding device.
The goal of cleaning the motherboard is to remove all dust and debris from the motherboard and all components inside of the case. This can be done using one of three methods.
The preferred method is to use a can of compressed air to blow it out. Always hold the can in an up-right position to prevent the propellent chemicals which can damage or corrode components from coming out. Dust and dirt should be blown away from the motherboard and out of the case.
Another way to remove dust is to use a vacuum. The common advice is to only use a battery operated vacuum because an AC powered vacuum causes static and static can ruin the motherboard. I have used an AC powered vacuum (before I knew that it was not recommended) to clean my motherboard many times and it has never caused any problems, but I may have just been lucky. When using the vacuum, keep the nozzle a couple of inches away from the motherboard or any other components so that it does not come in contact with them and so that any small parts are not sucked into the vacuum.
If you do not have a can of compressed air or a vacuum, you can use a dry cloth and brush to clean the motherboard. Be careful not to dislodge or break anything using this method.
While cleaning the motherboard, be careful not to unplug any cables or connections or to dislodge any loose components, such as, jumpers.
Methodically clean the whole inside of the case going over all of the motherboard from one end to the other and all other components. Don't forget to clean the fans and heat sinks. Do not open up the power supply box or stick anything in it beyond the fan. If you do, you could get a shocking surprise and ruin your computer.
If your computer does not work when you put it back together, something was obviously dislodged during the cleaning. Open the case back up and push all connections and cards into their slots. Look for anything that may have become disconnected.
Cleaning the motherboard is probably the most dangerous form of cleaning but it is necessary to prevent an early death of your computer.
The Super Duper Problem Fixer
One of our customers pointed out a new program to me and wanted me to check it out. This program called itself a bug fixer. It was a sharp looking program and claimed to fix bugs on the user's computer that he didn't even know existed.
It sounded like a super duper problem solver until I downloaded it and took a closer look. Being a programmer I quickly saw behind its smoke and mirrors. It actually only performed six of the over 1000 cleaning processes which our A1Click Ultra PC Cleaner and RegVac Registry Cleaner do.
Even though it did little compared to our programs, it found 504 problems. How can that be? My computer was clean. The program did not show any details about the results but wanted $30 before it would clean them. I'll never know for sure about those results, but I suspect that they were fabricated and that the true number of problems was 0.
There are many shady developers out there that just want to make a quick buck. I doubt this bug fixer program will even be around in a year.
This provides a good lesson to anyone. Be sure to purchase software from a trusted developer and don't buy a program just because it looks nice.
We have been in the software business since 1996 and are continually improving our programs. You will not hear hype and lies from us. Our programs may not look that good on the surface, but under the hood they are super. When you purchase our programs, all future updates are free.
If you haven't tried RegVac Registry Cleaner and A1Click Ultra PC Cleaner, try them today.
It sounded like a super duper problem solver until I downloaded it and took a closer look. Being a programmer I quickly saw behind its smoke and mirrors. It actually only performed six of the over 1000 cleaning processes which our A1Click Ultra PC Cleaner and RegVac Registry Cleaner do.
Even though it did little compared to our programs, it found 504 problems. How can that be? My computer was clean. The program did not show any details about the results but wanted $30 before it would clean them. I'll never know for sure about those results, but I suspect that they were fabricated and that the true number of problems was 0.
There are many shady developers out there that just want to make a quick buck. I doubt this bug fixer program will even be around in a year.
This provides a good lesson to anyone. Be sure to purchase software from a trusted developer and don't buy a program just because it looks nice.
We have been in the software business since 1996 and are continually improving our programs. You will not hear hype and lies from us. Our programs may not look that good on the surface, but under the hood they are super. When you purchase our programs, all future updates are free.
If you haven't tried RegVac Registry Cleaner and A1Click Ultra PC Cleaner, try them today.
Remote Blog or Self Hosted Blog?
So you’ve decided to blog, but aren’t sure whether you should host the blog yourself or sign up for a free service like blogger.com. It’s a dilemma that many bloggers face. There are pros and cons to both, which makes the decision difficult for many. Neither is perfect, and neither is for everyone. Fortunately, you should be able to make the best decision for you if you are armed with adequate knowledge of both. In this newsletter, we’ll go over services like blogger.com and others, plus software that allows you to host your own blog. We’ll also go over the pros and cons of each. After reading this, you will know which is best for you.
Who offers free blog hosting?
Many sites offer free blog hosting. Among them are Forumer, Blogger, BlogEasy, Aeonity, BlogThing and Blogates. A quick search for “free blog” on Google reveals many possibilities.
What software can I use to host my own blog?
Like free blog hosting, there are many possibilities for software that makes hosting your own blog easy. Most of them are free to use. These include:
WordPress(the most popular software)
Apache Roller
Blosxom
Geeklog
Textpattern
LifeType
There is also blog software which you can purchase for use on your site. These include:
Community Server
Movable Type
Radio UserLand
One negative about using software and hosting your own blog is that the process can often times be complicated. You have to download the software and install it to your server, which doesn’t always go easily. It’s particularly hard for those who don’t have a lot of experience installing things on servers.
Why should I remotely host my blog at a place like Blogger?
Places like Blogger allow you to host your blog there. It’s a good option for many people.
The Pros
• It’s easy to set up and maintain a blog. You don’t have to go through the trouble of installing software and configuring it to work on your server. All you have to do is sign up for an account and start posting.
• It’s friendly for beginning bloggers. Sites that host blogs offer good tutorials on how to make your blog postings, so that even someone who is completely new to the concept of blogging can do it easily.
• Most blog hosting sites are completely free to use. There is no need to pay for things like a domain name and hosting.
• Monetizing your blog is easy. Rather than having to manually put HTML/Javascript codes on your blog to manually set up things like AdSense and Pay Per Click advertising, you can select an option on most blog hosting sites that does much of the work for you.
The Cons
• You don’t have as many options to customize your blog. Remotely hosted blogs are admittedly somewhat limited in terms of what you can actually do on them. You have to stick with what is provided to you in terms of look and features.
• The URL you get is always yourname.BLOGSITE.com. You don’t get to have a custom domain name like YOURNAME.com. This can possibly hurt traffic to your blog.
• Blogs hosted on free blog sites don’t look as professional as self hosted blogs.
Why should I self-host my blog?
The Pros
• You have more options and more flexibility. You are able to tweak the blog to your liking.
• Your URL is your address for your blog. Rather than having go to where your blog is hosted to read it, they can read it right from your site.
• The ability to make your blog look professional. Blogs that are hosted on sites of their own tend to look a lot better than those hosted on free sites.
• More space for your blog. Free blog sites usually place a restriction on how much space you have for things like photos and music. By hosting your own blog, you are able to use as much space as you need.
The Cons
• There are sometimes problems with setting up blog software to run on your site and server. If you aren’t experienced when it comes to working with mySQL, the process will be hard.
• Updates aren’t as easy to post.
• You have to manually set up programs to monetize your blog. However, if you are good with HTML/Javascript, this shouldn’t be too hard.
• You have to pay for your own hosting and domain
As you can see, there are pros and cons to both. Which should you choose? Well, it depends on who you are and what you intend to use your blog for. If you intend to use it for business, then a self-hosted blog is the best idea. If it’s a personal blog, then a free hosted blog will probably be fine for you.
Closely examine all of the pros and cons mentioned above. That way, you’ll be able to make the best decision for you!
Who offers free blog hosting?
Many sites offer free blog hosting. Among them are Forumer, Blogger, BlogEasy, Aeonity, BlogThing and Blogates. A quick search for “free blog” on Google reveals many possibilities.
What software can I use to host my own blog?
Like free blog hosting, there are many possibilities for software that makes hosting your own blog easy. Most of them are free to use. These include:
WordPress(the most popular software)
Apache Roller
Blosxom
Geeklog
Textpattern
LifeType
There is also blog software which you can purchase for use on your site. These include:
Community Server
Movable Type
Radio UserLand
One negative about using software and hosting your own blog is that the process can often times be complicated. You have to download the software and install it to your server, which doesn’t always go easily. It’s particularly hard for those who don’t have a lot of experience installing things on servers.
Why should I remotely host my blog at a place like Blogger?
Places like Blogger allow you to host your blog there. It’s a good option for many people.
The Pros
• It’s easy to set up and maintain a blog. You don’t have to go through the trouble of installing software and configuring it to work on your server. All you have to do is sign up for an account and start posting.
• It’s friendly for beginning bloggers. Sites that host blogs offer good tutorials on how to make your blog postings, so that even someone who is completely new to the concept of blogging can do it easily.
• Most blog hosting sites are completely free to use. There is no need to pay for things like a domain name and hosting.
• Monetizing your blog is easy. Rather than having to manually put HTML/Javascript codes on your blog to manually set up things like AdSense and Pay Per Click advertising, you can select an option on most blog hosting sites that does much of the work for you.
The Cons
• You don’t have as many options to customize your blog. Remotely hosted blogs are admittedly somewhat limited in terms of what you can actually do on them. You have to stick with what is provided to you in terms of look and features.
• The URL you get is always yourname.BLOGSITE.com. You don’t get to have a custom domain name like YOURNAME.com. This can possibly hurt traffic to your blog.
• Blogs hosted on free blog sites don’t look as professional as self hosted blogs.
Why should I self-host my blog?
The Pros
• You have more options and more flexibility. You are able to tweak the blog to your liking.
• Your URL is your address for your blog. Rather than having go to where your blog is hosted to read it, they can read it right from your site.
• The ability to make your blog look professional. Blogs that are hosted on sites of their own tend to look a lot better than those hosted on free sites.
• More space for your blog. Free blog sites usually place a restriction on how much space you have for things like photos and music. By hosting your own blog, you are able to use as much space as you need.
The Cons
• There are sometimes problems with setting up blog software to run on your site and server. If you aren’t experienced when it comes to working with mySQL, the process will be hard.
• Updates aren’t as easy to post.
• You have to manually set up programs to monetize your blog. However, if you are good with HTML/Javascript, this shouldn’t be too hard.
• You have to pay for your own hosting and domain
As you can see, there are pros and cons to both. Which should you choose? Well, it depends on who you are and what you intend to use your blog for. If you intend to use it for business, then a self-hosted blog is the best idea. If it’s a personal blog, then a free hosted blog will probably be fine for you.
Closely examine all of the pros and cons mentioned above. That way, you’ll be able to make the best decision for you!
How to Clean a Printer
Does your printer have frequent paper jams? Does it put ink where ink shouldn't be? Is the outside of your printer dirty or covered with smudges? If so, it is time to clean your printer.
First, there are some general rules that apply to cleaning just about any electrical device. It is best to turn off the printer before cleaning it. Do not spray water or cleaner on or in the printer. Instead wet the rag with it and clean the printer with the rag.
Different types of printers require different cleaning methods. So if you can get your hands on cleaning instructions for your make and model of printer, do so and follow them. Unfortunately, many manufacturers only make that kind of information available to their licensed technicians. In that case, you are stuck with these instructions, so read on.
Open up your printer and take a look.
If you have an ink jet printer and there is an ink mess inside, clean it up with wet paper towels.
If you have a printer that uses toner either vacuum or blow it out. Some toner, especially color toner, can be harmful to you, so only use a vacuum with a micro-toner filter or blow and run. Figure out where the drum is (it is shiny and larger in diameter than the rollers) and do not touch or scratch it. If you do, the scratches will turn up as marks on every paper that you print and will require that you replace the drum (not a cheap option) to fix it.
Examine the path that the paper takes through the printer. Clean all of the rollers (but on a toner printer, not the drum or rollers near the drum and watch out for the rollers after the drum because they may be hot). It may take some disassembly and/or contorting of your arm to get to some of the rollers. Access is not always easy. The most important rollers to clean are the ones which pick up the paper from the paper bin and transfer it into the printer. If these rollers are dirty or bad, they will cause consistent paper jams.
The rollers are made of either hard plastic or rubber. All of the rollers can be cleaned with water or rubbing alcohol. If the rubber rollers have deposits that you can't get off, you can use harsher cleaners but be careful because those cleaners can damage the plastic rollers and parts.
To clean a roller, wipe across the roller with a wet rag, rotate the roller, and wipe again. Do this until you have worked your way all the way around the roller. Look at the rag. If it has been blackened by the roller, move to a clean part of the rag and clean the roller again.
Once everything is clean on the inside, close it up and clean the outside. Wipe off the case and each of the buttons or knobs. If there are staples or paper clips sitting on it or wedged in the cracks, remove them and throw them away.
Other areas of the printer can be cleaned but to do so, you will have to either get training and special tools or leave it to a trained professional.
First, there are some general rules that apply to cleaning just about any electrical device. It is best to turn off the printer before cleaning it. Do not spray water or cleaner on or in the printer. Instead wet the rag with it and clean the printer with the rag.
Different types of printers require different cleaning methods. So if you can get your hands on cleaning instructions for your make and model of printer, do so and follow them. Unfortunately, many manufacturers only make that kind of information available to their licensed technicians. In that case, you are stuck with these instructions, so read on.
Open up your printer and take a look.
If you have an ink jet printer and there is an ink mess inside, clean it up with wet paper towels.
If you have a printer that uses toner either vacuum or blow it out. Some toner, especially color toner, can be harmful to you, so only use a vacuum with a micro-toner filter or blow and run. Figure out where the drum is (it is shiny and larger in diameter than the rollers) and do not touch or scratch it. If you do, the scratches will turn up as marks on every paper that you print and will require that you replace the drum (not a cheap option) to fix it.
Examine the path that the paper takes through the printer. Clean all of the rollers (but on a toner printer, not the drum or rollers near the drum and watch out for the rollers after the drum because they may be hot). It may take some disassembly and/or contorting of your arm to get to some of the rollers. Access is not always easy. The most important rollers to clean are the ones which pick up the paper from the paper bin and transfer it into the printer. If these rollers are dirty or bad, they will cause consistent paper jams.
The rollers are made of either hard plastic or rubber. All of the rollers can be cleaned with water or rubbing alcohol. If the rubber rollers have deposits that you can't get off, you can use harsher cleaners but be careful because those cleaners can damage the plastic rollers and parts.
To clean a roller, wipe across the roller with a wet rag, rotate the roller, and wipe again. Do this until you have worked your way all the way around the roller. Look at the rag. If it has been blackened by the roller, move to a clean part of the rag and clean the roller again.
Once everything is clean on the inside, close it up and clean the outside. Wipe off the case and each of the buttons or knobs. If there are staples or paper clips sitting on it or wedged in the cracks, remove them and throw them away.
Other areas of the printer can be cleaned but to do so, you will have to either get training and special tools or leave it to a trained professional.
How to Clean the Registry
In the beginning Windows' registry consisted of two files totalling around 5mb in size. Today it consists of at least 12 files with the Software file itself being 30mb or bigger in size. As the size of the registry has exploded, so has the trash and clutter in it. It may seem like a daunting task, but cleaning the registry properly can fix system problems, speed your computer up, and make it run more efficiently.
I have spent many years developing and refining thousands of procedures to do just that. I could share these methods of hunting down the trash with you and let you find them and delete them by hand, but if you were to sit down at your computer right now and work nonstop, you would still be busy with them a week from now when the next issue of Ray's Computer Tips arrives. By then your registry would have new clutter and you would have to start all over again.
To make registry cleaning easier on everyone, I wrote a program called RegVac Registry Cleaner (http://regvac.com/regvac.htm) to perform those procedures. It has been so successful that several companies have asked me to model their registry cleaners after RegVac and even more have copied processes that first debutted in RegVac.
The first place RegVac cleans is the HKEY_CLASSES_ROOT section (the Classes Vac in RegVac does this). This section contains settings for the classes of Windows. Think of a huge box full of snakes and you will get an idea of how complicated and interwoven it is. It is so complicated that many registry cleaners bypass it or simply perform surface scans of it. RegVac uses over a hundred processes to follow each tentacle of each class deep into this area and make sure that they abide by the rules.
Next RegVac validates the entries in 22 lists with 7 different methods (the FilesList Vac does this). This is a minor part of RegVac but the bulk of most other registry cleaners even though they usually do not clean all 22 lists.
Another part of RegVac, the Software Vac, which is unique to RegVac, finds old software sections in the registry and provides a way to remove that software's entire branch. Other registry cleaners only remove a few entries in this area often leaving huge portions of the registry that do nothing but take up space and get in the way.
Even more trash can be discovered in hundreds of stashes used to store data you will never use. Most registry cleaners do not even touch these. The Stash Vac lists these stashes and lets you go through and select which ones to empty out. Please use caution when using the Stash Vac because some of the items listed there may be important. For example, one folder in the Stash Vac lists places where data for international keyboards are stored. You probably will never use the data for Bulgarian keyboards, so you can remove it, but if you live in the US you may experience problems after removing the United States 101 keyboard. The items that you can safely remove are usually obvious.
Last but not least, when cleaning the registry, you should look for broken links to files on the computer (this is what the Bad Link Vac does). If a file is referenced in the registry but it does not exist on your hard drive, that is a good indicator that something is wrong. Many programmers start out writing a registry cleaner thinking all it has to do is check for these broken links and remove them. In fact, that is all many registry cleaners do.
Even though that is all they do, they often don't do it correctly. If you check the results of such scans, you will find out that many of the broken links are really good links. I spent several months refining this part of RegVac so that as far as I know it is 100% accurate. Despite this, please realize that some software enter broken links in the registry and require them to be there in order for them to run. RegVac skips the ones it knows about, but you still need to be careful with this part of RegVac.
RegVac has six more tools that clean even more areas: the Add/Remove Editor, the System Config Utility, the OpenWith Editor, the AutoComplete Editor, the Junk Keys Editor, and Registry Backup, Pack, and Restore.
Many of you already use RegVac but if you don't, you can downloaded a free 30 day trial of RegVac at http://regvac.com/regvacz.exe. For more information about RegVac Registry Cleaner go to http://regvac.com/regvac.htm. If you like RegVac, you can purchase it for only $29.95. All future updates are free.
Keep the Windows registry clean and running smoothly with RegVac Registry Cleaner.
I have spent many years developing and refining thousands of procedures to do just that. I could share these methods of hunting down the trash with you and let you find them and delete them by hand, but if you were to sit down at your computer right now and work nonstop, you would still be busy with them a week from now when the next issue of Ray's Computer Tips arrives. By then your registry would have new clutter and you would have to start all over again.
To make registry cleaning easier on everyone, I wrote a program called RegVac Registry Cleaner (http://regvac.com/regvac.htm) to perform those procedures. It has been so successful that several companies have asked me to model their registry cleaners after RegVac and even more have copied processes that first debutted in RegVac.
The first place RegVac cleans is the HKEY_CLASSES_ROOT section (the Classes Vac in RegVac does this). This section contains settings for the classes of Windows. Think of a huge box full of snakes and you will get an idea of how complicated and interwoven it is. It is so complicated that many registry cleaners bypass it or simply perform surface scans of it. RegVac uses over a hundred processes to follow each tentacle of each class deep into this area and make sure that they abide by the rules.
Next RegVac validates the entries in 22 lists with 7 different methods (the FilesList Vac does this). This is a minor part of RegVac but the bulk of most other registry cleaners even though they usually do not clean all 22 lists.
Another part of RegVac, the Software Vac, which is unique to RegVac, finds old software sections in the registry and provides a way to remove that software's entire branch. Other registry cleaners only remove a few entries in this area often leaving huge portions of the registry that do nothing but take up space and get in the way.
Even more trash can be discovered in hundreds of stashes used to store data you will never use. Most registry cleaners do not even touch these. The Stash Vac lists these stashes and lets you go through and select which ones to empty out. Please use caution when using the Stash Vac because some of the items listed there may be important. For example, one folder in the Stash Vac lists places where data for international keyboards are stored. You probably will never use the data for Bulgarian keyboards, so you can remove it, but if you live in the US you may experience problems after removing the United States 101 keyboard. The items that you can safely remove are usually obvious.
Last but not least, when cleaning the registry, you should look for broken links to files on the computer (this is what the Bad Link Vac does). If a file is referenced in the registry but it does not exist on your hard drive, that is a good indicator that something is wrong. Many programmers start out writing a registry cleaner thinking all it has to do is check for these broken links and remove them. In fact, that is all many registry cleaners do.
Even though that is all they do, they often don't do it correctly. If you check the results of such scans, you will find out that many of the broken links are really good links. I spent several months refining this part of RegVac so that as far as I know it is 100% accurate. Despite this, please realize that some software enter broken links in the registry and require them to be there in order for them to run. RegVac skips the ones it knows about, but you still need to be careful with this part of RegVac.
RegVac has six more tools that clean even more areas: the Add/Remove Editor, the System Config Utility, the OpenWith Editor, the AutoComplete Editor, the Junk Keys Editor, and Registry Backup, Pack, and Restore.
Many of you already use RegVac but if you don't, you can downloaded a free 30 day trial of RegVac at http://regvac.com/regvacz.exe. For more information about RegVac Registry Cleaner go to http://regvac.com/regvac.htm. If you like RegVac, you can purchase it for only $29.95. All future updates are free.
Keep the Windows registry clean and running smoothly with RegVac Registry Cleaner.
How To clean your Case
There is nothing wrong with leaving spills, dirt, and stains on your computer case. After all isn't that what the case is for, to protect the electronic components inside from spills and dirt? This is true, but there are still parts of the case that need to be cleaned and checked if you want your computer to live a long and prosperous life.
Unless you like looking at dirt everytime you look at your computer, you should go ahead and clean those spills, stains, and dust off of the case. You can do this with just about any cloth and cleaner. Do not use highly abrasive cleaners that might ruin or mar the surface and do not use solvents on plastic. A wet sponge will even work. Just make sure that the cleaner or any liquid does not seep into the inside through cracks and vents. If there is any possibility that you are going to get that messy, turn off and unplug the computer first and wait to turn it back on until any liquid has had a chance to fully dry.
After you have wiped off the outside, it is time for a little inspection. Look at the blades of the fan in the back of the computer. Also look at any vents. Is there dust there? Is there a lot of dust and grime caked on to it? If so, that is an indicator that the inside also needs to be cleaned (I will tell you how to do that in next week's article - How to Clean your Motherboard).
Some clean environments never have to have the inside cleaned. Some need it cleaned monthly. When I lived in Russia, even though I didn't notice it, the air was not clean. The fan on the computer would cake up with dirt and grime after about a month of use. And so I would have to clean the fan, vents, and inside monthly. If I had let it go for several months without cleaning, the fan would have stopped working and the computer would have overheated. Where I now live in the US, the air is clean and I have gone years without having to clean it. Again, the indicator of this is the blades of the fan and the vents. If they are dirty, they need to be cleaned.
You can do some of the cleaning from the outside. First, turn off the computer. Then get out the vacuum sweeper and using the hose, vacuum out the vents and the fan(s). If you have compressed air (you can purchase compressed air from your computer store), you may want to blow air in through the vents (or intake fan if you have one) to loosen the dust and suck it out using the vacuum. If there is still dust or dirt in the vents or on the blades of the fan, you can use a Q-tip to clean them.
If you do not have a vaccum, you can use compressed air alone. Always use short bursts to avoid moisture buildup. Start with the computer off and blow into every hole and vent. Then turn the computer on and blow everything except for the exhaust fan once again.
With the case clean, your computer will look nicer and with the fan and vents cleaned out it will breathe easier and run cooler.
Unless you like looking at dirt everytime you look at your computer, you should go ahead and clean those spills, stains, and dust off of the case. You can do this with just about any cloth and cleaner. Do not use highly abrasive cleaners that might ruin or mar the surface and do not use solvents on plastic. A wet sponge will even work. Just make sure that the cleaner or any liquid does not seep into the inside through cracks and vents. If there is any possibility that you are going to get that messy, turn off and unplug the computer first and wait to turn it back on until any liquid has had a chance to fully dry.
After you have wiped off the outside, it is time for a little inspection. Look at the blades of the fan in the back of the computer. Also look at any vents. Is there dust there? Is there a lot of dust and grime caked on to it? If so, that is an indicator that the inside also needs to be cleaned (I will tell you how to do that in next week's article - How to Clean your Motherboard).
Some clean environments never have to have the inside cleaned. Some need it cleaned monthly. When I lived in Russia, even though I didn't notice it, the air was not clean. The fan on the computer would cake up with dirt and grime after about a month of use. And so I would have to clean the fan, vents, and inside monthly. If I had let it go for several months without cleaning, the fan would have stopped working and the computer would have overheated. Where I now live in the US, the air is clean and I have gone years without having to clean it. Again, the indicator of this is the blades of the fan and the vents. If they are dirty, they need to be cleaned.
You can do some of the cleaning from the outside. First, turn off the computer. Then get out the vacuum sweeper and using the hose, vacuum out the vents and the fan(s). If you have compressed air (you can purchase compressed air from your computer store), you may want to blow air in through the vents (or intake fan if you have one) to loosen the dust and suck it out using the vacuum. If there is still dust or dirt in the vents or on the blades of the fan, you can use a Q-tip to clean them.
If you do not have a vaccum, you can use compressed air alone. Always use short bursts to avoid moisture buildup. Start with the computer off and blow into every hole and vent. Then turn the computer on and blow everything except for the exhaust fan once again.
With the case clean, your computer will look nicer and with the fan and vents cleaned out it will breathe easier and run cooler.
Subscribe to:
Posts (Atom)
